arXiv preprint ·
A Tightly Coupled Magnetic-Inertial SLAM System for Field Robots
- Published
- Source
- arXiv preprint, posted before peer review
- Original
- Read it at arXiv
- Topics
Abstract
Field robots operating in mines, tunnels, and disaster areas require reliable localization despite GNSS denial and degraded camera and LiDAR measurements caused by dust, smoke, or poor illumination. Missions involving both ground and aerial robots further motivate complementary sensing modalities that do not depend on visibility, preinstalled infrastructure, or wheel contact. This letter presents MISLAM, a tightly coupled magnetic-inertial simultaneous localization and mapping system using an IMU and a nine-magnetometer array, without relying on external odometry or platform-specific motion assumptions. The system combines the inertial navigation model with local polynomial magnetic-field models for short-term motion estimation and a global Gaussian process model for drift correction using an error-state Kalman filter. Offline evaluation on three indoor datasets collected with a handheld rig shows reductions in total endpoint closure error of 45.7% - 78.0% relative to magnetic-inertial odometry. Under poor illumination, MISLAM maintains tracking after visual-inertial odometry fails, achieving a horizontal closure error of 0.332 m, although vertical drift remains a limitation. These results support magnetic-inertial SLAM as a complementary localization modality for robotic sensor suites operating under degraded visual conditions.
The authors’ abstract, as arXiv lists it. arXiv’s listings, abstracts included, are free for anyone to reuse.
Read it on ReadSearch
Each opens after you create an account, and brings you back to this paper.
More in Robotics
A Beam-Switched Sparse Circular Array for Passive Wi-Fi Sensing
Mutual-Coupling-Aware Joint Precoding and Antenna Positioning for Movable-Antenna MU-MIMO Systems
Nearest Is Not Safest: Fluid-Antenna Port Selection for Over-the-Air Backpropagation in Urban Multipath
Directional Statistics in Signal Processing: A Geometry Driven Overview of Models, Learning, and Applications
Which Chains to Calibrate for Physical Backpropagation: Per-User Factors Versus Base-Station Chains
Get the few papers worth your time in Robotics every morning.
ReadSearch reads the new papers in your field each day and brings you the few worth reading, each with its key finding in a sentence.