arXiv preprint ·
High-Precision RCM Motion for Ophthalmic Robotics via Hierarchical QP Control and Authority-Guided Recovery Planning
- Published
- Source
- arXiv preprint, posted before peer review
- Original
- Read it at arXiv
- Topics
Abstract
General-purpose manipulators can position ophthalmic instruments under a software Remote Centre of Motion (RCM). However, at some reachable configurations that are nonsingular for the tip task alone, the RCM and tip-tracking objectives conflict and the servo oscillates. We formalise this failure as a constraint-induced task singularity: the RCM-projected tip Jacobian loses rank while the unprojected tip Jacobian stays well conditioned. Thus, the effective tip authority collapses although the target remains reachable. We present a high-precision RCM servo architecture with built-in singularity recovery: for each commanded target, an authority-guided planner selects a well-conditioned arm configuration that reaches it and plans an RCM-consistent route, executed by a fixed hierarchical-QP controller. On a 200-scenario kinematic benchmark, the complete nominal-and-recovery protocol reaches 128/128 near-singular targets and 71/72 near-joint-limit targets (100% and 99%, respectively), with the software-RCM residual below 0.142 mm. On a physical 6-DOF arm it executes across four RCM entry points, with a worst-case kinematically reconstructed RCM residual of 178 μm and a median tip-regulation error of 32μm, within the 200μm control requirement adopted for the ophthalmic task.
The authors’ abstract, as arXiv lists it. arXiv’s listings, abstracts included, are free for anyone to reuse.
Read it on ReadSearch
Each opens after you create an account, and brings you back to this paper.
More in Robotics
Real-Time Disturbance-Aware Koopman Model Predictive Control for Quadrotors in Spatially Varying Winds
PHD-Hand: A Printable Humanoid Dexterous Hand with Linkage-Driven 3-DOA Digits
Towards Autonomous Bricklaying Using Boston Dynamics Spot
Causal world models under physical parameter shifts
HATCH: Hardware-Attested Task Chains for Verifiable Manipulation
Get the few papers worth your time in Robotics every morning.
ReadSearch reads the new papers in your field each day and brings you the few worth reading, each with its key finding in a sentence.