arXiv preprint ·
TacGELLO: Tactile Contact Feedback for a 3D-Printed Teleoperation Leader
- Published
- Source
- arXiv preprint, posted before peer review
- Original
- Read it at arXiv
- Topics
Abstract
Passive leader arms transmit an operator's motion without returning remote contact or load cues. TacGELLO uses the existing servos of a 3D-printed leader for tactile contact feedback at the gripper trigger and current-based load cues at the arm joints. AnySkin contact detection activates a trigger position hold, while changes in follower joint current adjust leader-servo output limits to command resistance during lifting. Across six UR3 sessions with one operator, sent-command tracking error was 0.15--0.36$^\circ$ RMSE, with estimated trajectory lag of 82--98\,ms. Tactile onset was logged in 60 of 62 segmented TacGELLO grasp intervals. Median commanded closure after tactile or width-based contact references was 0.7--2.1\,mm with TacGELLO and 13.0--13.9\,mm with the original interface.
The authors’ abstract, as arXiv lists it. arXiv’s listings, abstracts included, are free for anyone to reuse.
Read it on ReadSearch
Each opens after you create an account, and brings you back to this paper.
More in Robotics
Tackling Sim-to-Real Mismatch Through Sampling-Based Disturbance Observers: From Analytical Models to Learned World Models
FOCUS: Fine-Grained Open-Vocabulary Change Detection for Uncertainty-Aware Semi-Static Scenes
GJK-CBF: Control Barrier Functions for Convex Rigid Body Collision Avoidance on SE(3)
Spacecraft Rendezvous Trajectory Generation with Modular Constraints via Diffusion Model Composition
$R^2$-WAM: Repair-and-Reject Post-Training for World Action Models
Get the few papers worth your time in Robotics every morning.
ReadSearch reads the new papers in your field each day and brings you the few worth reading, each with its key finding in a sentence.